If your cell phone has been submersed in water recently and you have managed to save it yourself, then good for you. But, there are some other tips that you might want to know just in case.
Another method for helping the phone dry out (if you do not have any rice on hand) is to put it on top of the vent on a monitor or a television for at least 24 hours. The low amount of heat put out by these devices should be enough to gently dry out the phone.
If you are the kind of person who keeps the silica packs that come packed in electronics, coats, shoes, and etcetera, you can put the phone into a plastic bag with a couple of these and let them absorb the moisture over a couple of days. If you do not have these on hand, a local craft store should have a flower drying kit that will contain a silica sand-type mixture. Put it in a Tupperware dish, use a dryer sheet, lay the phone on top of it, and seal it.
Corrosion is a definite threat to cell phones and other electronics and some people have suggested that you wash the phone in distilled water to wash away any kind of minerals that might have existed in the water or other liquid the phone was originally submersed in. If you choose to try this, do it only after you have removed the SIM card and battery.
If the battery is wet, do NOT heat it to try and dry it out. Batteries, especially lithium-ion ones, are quite sensitive and they very well may explode if you try to speed up the drying process in this manner.
If you choose to use alcohol to clean off parts of the phone that are sticky with soda or another similar liquid, do not apply heat to the device in any way. Do not reattach the battery until the smell of alcohol is completely gone.
This might also seem like common sense, but do not put any electronic device into the microwave. You will probably destroy not only your device, but even your microwave could be put at risk.
You should be aware that most phone warranties do not cover water damaged phones and that most phones today have special stickers inside them (only one visible to you) that will tell a technician if the phone has come into contact with water or even just too much humidity. Be careful when taking your phone outdoors when humidity is very high. It is possible to void your warranty.
Showing posts with label water damage. Show all posts
Showing posts with label water damage. Show all posts
Tuesday, January 22, 2008
Things You Should Know About Water Damage And Your Computer
Water or almost any other kind of liquid is not a great thing to have around your computer or any other electronic device. This kind of damage can be expensive to either replace or to have repaired and unfortunately, many people who are unfortunate enough to have this happen to them cannot afford it.
If the liquid spilled upon the device is acidic, like soda or coffee, then it generally does more damage than simple water would do. It causes more corrosion to the metal areas of the motherboard or any other computer component such as the hard drive or CD-ROM.
One of the worst case scenarios is that you spill a liquid onto your laptop where everything, motherboard, hard drive, CD-ROM, and etcetera are all packed into the same general area. In most cases of water damage to computers, the liquid is spilled merely on the keyboard or another outside component such as the mouse. With laptops, spilling a liquid on the keyboard does not mean that only the keyboard is affected, but also the other components sharing the shell of the laptop are, as well. What can you do if water or another liquid is spilled on your laptop?
Unplug it from the A/C adapter and remove the battery IMMEDIATELY. Unplug any other external devices including external hard drives, mice, other input devices, CD-ROMs, DVD-ROMs, and etcetera. The next thing is to turn the laptop completely upside down to stop the liquid from sinking any further into it.
Use a towel or paper towels to clean up the spilled liquid, wipe off the keyboard, exterior, and any external devices that came into contact with the liquid as well.
At this point, you could do one of two things. You could take it to a professional repairman and have them look at it (I hope you have an extra arm and leg lying around) or if you know how to take something apart and put it back together, you can try to fix it yourself. In trying to fix it, you may irreparably damage it, so if you are even remotely unsure about your ability to repair it, it is better to take it to a professional.
If you choose the do-it-yourself route, disassemble the computer and allow it to dry out completely for at least 24 hours, if not longer. Let it dry until you are satisfied that it is completely done. Whatever you do, do not turn the power on before it is. It is not water itself that kills the circuit board of any electronic device, but the electricity that runs through it when someone tries to turn the device on when it is still wet.
If it was just water, drying should be all it needs. If it was soda or any other acidic liquid, clean it with rubbing alcohol and Q-tips, then put it back together and wait for the alcohol to dry. See if it works.
If the liquid spilled upon the device is acidic, like soda or coffee, then it generally does more damage than simple water would do. It causes more corrosion to the metal areas of the motherboard or any other computer component such as the hard drive or CD-ROM.
One of the worst case scenarios is that you spill a liquid onto your laptop where everything, motherboard, hard drive, CD-ROM, and etcetera are all packed into the same general area. In most cases of water damage to computers, the liquid is spilled merely on the keyboard or another outside component such as the mouse. With laptops, spilling a liquid on the keyboard does not mean that only the keyboard is affected, but also the other components sharing the shell of the laptop are, as well. What can you do if water or another liquid is spilled on your laptop?
Unplug it from the A/C adapter and remove the battery IMMEDIATELY. Unplug any other external devices including external hard drives, mice, other input devices, CD-ROMs, DVD-ROMs, and etcetera. The next thing is to turn the laptop completely upside down to stop the liquid from sinking any further into it.
Use a towel or paper towels to clean up the spilled liquid, wipe off the keyboard, exterior, and any external devices that came into contact with the liquid as well.
At this point, you could do one of two things. You could take it to a professional repairman and have them look at it (I hope you have an extra arm and leg lying around) or if you know how to take something apart and put it back together, you can try to fix it yourself. In trying to fix it, you may irreparably damage it, so if you are even remotely unsure about your ability to repair it, it is better to take it to a professional.
If you choose the do-it-yourself route, disassemble the computer and allow it to dry out completely for at least 24 hours, if not longer. Let it dry until you are satisfied that it is completely done. Whatever you do, do not turn the power on before it is. It is not water itself that kills the circuit board of any electronic device, but the electricity that runs through it when someone tries to turn the device on when it is still wet.
If it was just water, drying should be all it needs. If it was soda or any other acidic liquid, clean it with rubbing alcohol and Q-tips, then put it back together and wait for the alcohol to dry. See if it works.
Water And Your Cell Phone Do Not Mix
Many people have horror stories about how they lost anywhere between $50 and $600 on replacing a cell phone that was dropped into the toilet or the bath tub or any other liquid. The sad fact is that most cell phone warranties do not cover water damage and unfortunately, cell phone manufacturers have begun to place what some are calling “snitch stickers” in their phones that change color if they have been exposed to even a drop of water. While this keeps people trying to get a new free phone from saying that their old phone was not water damaged when it actually was, it is unfortunate for the consumer because these stickers have been known to change color in even just high humidity. So, water damage to phones is a serious problem, but what do you do if your phone does become submersed?
Take it out of the water immediately. The plastic covers on most cell phones these days are pretty tight, but water can get inside the phone. As long as you get the phone out of the water in under around 20 seconds, it should not have that much opportunity to seep in.
After you do that, remove the battery and do not hesitate. This is to effectively cut the power supply off from your phone; electricity and water combined are what fries your phone, not just the water itself.
If your phone has a SIM card, remove that quickly, as well. These cards store contact and other kinds of data from the phone and to some people, the information held on that card could be more valuable than the phone itself, even if the phone might cost them $600. Some service providers, however, do not use SIM cards, like Verizon Wireless.
Do not put the battery or the SIM card back into the phone. Dry them separately. Then, dry the phone itself from the outside and then if possible, put it in a bowl of rice and let it stay there overnight. You might get a grain of rice or two in your phone, but this probably will not happen. Rice will help draw out the moisture. Wait at least two or three days before trying to turn your phone back on. Never turn on an electronic device after it has been wet until you are sure it has completely dried out.
As long as the phone looks dry, it should be safe to try and turn the phone on. If it doesn’t work with the battery, try plugging it into the wall outlet. If this works, you just need to replace the battery.
Take it out of the water immediately. The plastic covers on most cell phones these days are pretty tight, but water can get inside the phone. As long as you get the phone out of the water in under around 20 seconds, it should not have that much opportunity to seep in.
After you do that, remove the battery and do not hesitate. This is to effectively cut the power supply off from your phone; electricity and water combined are what fries your phone, not just the water itself.
If your phone has a SIM card, remove that quickly, as well. These cards store contact and other kinds of data from the phone and to some people, the information held on that card could be more valuable than the phone itself, even if the phone might cost them $600. Some service providers, however, do not use SIM cards, like Verizon Wireless.
Do not put the battery or the SIM card back into the phone. Dry them separately. Then, dry the phone itself from the outside and then if possible, put it in a bowl of rice and let it stay there overnight. You might get a grain of rice or two in your phone, but this probably will not happen. Rice will help draw out the moisture. Wait at least two or three days before trying to turn your phone back on. Never turn on an electronic device after it has been wet until you are sure it has completely dried out.
As long as the phone looks dry, it should be safe to try and turn the phone on. If it doesn’t work with the battery, try plugging it into the wall outlet. If this works, you just need to replace the battery.
Fixing A Water Damaged Laptop
You might not it, but the circuit board in your laptop and any other electronic items in your house were rinsed in clean water and dried before they were put into use? As long as the water is clean, the device will not be irreparably damaged. If something is allowed to soak in dirty water, however, with different particles and other mineral content, then the device will become damaged.
If you have a laptop that has gotten wet, the first thing to do is to turn it off immediately and remove all sources of power from it including the A/C adapter and batteries. Set these aside while you take the laptop and turn it upside down. This will stop any more liquid from seeping further into the computer.
After you do that, use paper towels or a rag to mop up the liquid that was spilled, wipe the liquid off the keyboard and the outside. Also wipe down anything else electronic nearby that got wet, too, like an external CD-ROM or external hard drive.
Disassemble the laptop (take a look at your user’s manual, too) and allow the insides to air out for at least a full day. Most people who have gone through this procedure recommend longer, especially if the liquid got further down into the computer. The best thing to do is let it sit and dry until you are confident that the interior is completely moisture-free.
If the only liquid it came into contact with was water out of your faucet, then allowing it to dry should be all that is necessary, but if it was something like soda, tea, or coffee that was spilled onto it, then you will want to clean it with some rubbing alcohol. You can use cotton swabs for this. Do not apply any heat to the device while you are cleaning it with alcohol and wait until the smell of alcohol is completely gone before you try to power it up.
Put the device back together after you are finished letting it dry or cleaning it up. Reattach the battery and see if it powers on. If it does, wait and see if it starts up as it should. If it does not, then attach the A/C adapter and plug it up. If you can turn the device on after trying this, then all you should need is a new battery. This should be pretty easy to obtain, as long as you have the money to purchase it with, either from the manufacturer or from a site like eBay.
If you have a laptop that has gotten wet, the first thing to do is to turn it off immediately and remove all sources of power from it including the A/C adapter and batteries. Set these aside while you take the laptop and turn it upside down. This will stop any more liquid from seeping further into the computer.
After you do that, use paper towels or a rag to mop up the liquid that was spilled, wipe the liquid off the keyboard and the outside. Also wipe down anything else electronic nearby that got wet, too, like an external CD-ROM or external hard drive.
Disassemble the laptop (take a look at your user’s manual, too) and allow the insides to air out for at least a full day. Most people who have gone through this procedure recommend longer, especially if the liquid got further down into the computer. The best thing to do is let it sit and dry until you are confident that the interior is completely moisture-free.
If the only liquid it came into contact with was water out of your faucet, then allowing it to dry should be all that is necessary, but if it was something like soda, tea, or coffee that was spilled onto it, then you will want to clean it with some rubbing alcohol. You can use cotton swabs for this. Do not apply any heat to the device while you are cleaning it with alcohol and wait until the smell of alcohol is completely gone before you try to power it up.
Put the device back together after you are finished letting it dry or cleaning it up. Reattach the battery and see if it powers on. If it does, wait and see if it starts up as it should. If it does not, then attach the A/C adapter and plug it up. If you can turn the device on after trying this, then all you should need is a new battery. This should be pretty easy to obtain, as long as you have the money to purchase it with, either from the manufacturer or from a site like eBay.
Your Cell Phone, Water, and a Sticker
Water is a part of our everyday lives, but most of us who own electronic devices can readily admit that it is not only the source of live, but also the source of some pretty pricey problems. It is every cell phone or blackberry owner’s nightmare: dropping that $400 device into the bathtub or into the pool. What do you do with it after you drop it into water? How late is too late to save it? And if it can be saved, how do you do it?
Well, if you have a newer cell phone, odds are that if you drop it in water, you will not be able to get the phone’s warranty to cover the water damage. It is not covered under most cell phone warranties and this is one reason that you should be especially careful if you plan on getting your phone anywhere near water. The new phones have been equipped with small white stickers both inside the battery compartments and on the circuit board deeper inside the phone. When the phone gets wet (or when it is simply exposed to humidity that is just too high), the sticker changes color due to a powdered dye underneath it. When you take your phone to the manufacturer to try and file a claim, they tell you that they cannot give you any compensation because the phone has been water damaged, even if you have not actually dropped the phone in water. If humidity is too high, the sticker trips and you are out of luck.
What can you do to try and remedy this problem? If you live in an area that is subject to pretty high humidity, you can take a piece of satin finished scotch tape and place a piece over the sticker on the battery compartment. The problem is getting to the other sticker that is usually on the phone’s circuit board. If you can manage that, then hat’s off to you. If your phone stops working and you need to file a claim, remove the tape.
If you do happen to drop your phone in the water, get it out in under 20 seconds and remove the power supply completely. Submerge it in a bowl of uncooked rice at least overnight and do NOT try to power on the phone until you are completely certain it is dry. If you put the battery back in and it works, congratulations. If not, try using it with your AC adapter. If this works, all you need is a new phone battery.
Well, if you have a newer cell phone, odds are that if you drop it in water, you will not be able to get the phone’s warranty to cover the water damage. It is not covered under most cell phone warranties and this is one reason that you should be especially careful if you plan on getting your phone anywhere near water. The new phones have been equipped with small white stickers both inside the battery compartments and on the circuit board deeper inside the phone. When the phone gets wet (or when it is simply exposed to humidity that is just too high), the sticker changes color due to a powdered dye underneath it. When you take your phone to the manufacturer to try and file a claim, they tell you that they cannot give you any compensation because the phone has been water damaged, even if you have not actually dropped the phone in water. If humidity is too high, the sticker trips and you are out of luck.
What can you do to try and remedy this problem? If you live in an area that is subject to pretty high humidity, you can take a piece of satin finished scotch tape and place a piece over the sticker on the battery compartment. The problem is getting to the other sticker that is usually on the phone’s circuit board. If you can manage that, then hat’s off to you. If your phone stops working and you need to file a claim, remove the tape.
If you do happen to drop your phone in the water, get it out in under 20 seconds and remove the power supply completely. Submerge it in a bowl of uncooked rice at least overnight and do NOT try to power on the phone until you are completely certain it is dry. If you put the battery back in and it works, congratulations. If not, try using it with your AC adapter. If this works, all you need is a new phone battery.
First Steps To Take If Your Home Is Water Damaged
Having a home that is located close to the ocean or close to a fresh water source can be a nice and aesthetically pleasing experience, but what do you do if it happens to flood? A flood can be a nightmare for any homeowner, whether the home is newly built or 30 years old and a lot of people do not know how to deal with this situation, simply because most have not ever had to.
If your home does become a victim of flooding and water damage either due to rain, a levy breaking, or hurricane, there are a few things that you can do to help minimize the damage once the water has receded. It is best to tend to the home as soon as possible after the waters have receded back away from your home.
When you do finally get the opportunity to re-enter your home, you must be absolutely certain that the electricity to your entire home is cut off. There is a serious risk of electrocution if you step into your home without making sure of this first and foremost. There are also some serious biological risks that you will be taking when you re-enter a home that has been flooded simply because of all the different chemicals, trash, sewage, and even dead bodies that could be floating around in it.
If you can afford to purchase some protective gear before trying to dry out your home, please do so. Wash your hands extremely well before you eat anything to avoid infecting yourself with anything that may be in the water.
Before you do anything at all to try and repair the damage to your home, you need to use a video camera to record the damage. Tape every section of your home that has suffered significant damage and point out everything that you notice that will have to be repaired. This will offer you irreplaceable help when you try to file an insurance claim on the home.
Remove any insulation in the attic that has gotten wet. It is no longer effective and has become very heavy. It will weigh your ceiling down and eventually cause it to collapse in sections.
You should also remove anything else that is wet and set it outside to dry in the sun, although some items should be let to dry in the shade to keep the sun from bleaching them.
Do not use artificial heat sources to dry hardwood floors. This will cause what is called cupping or can cause the floor to buckle. Open the windows and let air circulate through the home.
If your home does become a victim of flooding and water damage either due to rain, a levy breaking, or hurricane, there are a few things that you can do to help minimize the damage once the water has receded. It is best to tend to the home as soon as possible after the waters have receded back away from your home.
When you do finally get the opportunity to re-enter your home, you must be absolutely certain that the electricity to your entire home is cut off. There is a serious risk of electrocution if you step into your home without making sure of this first and foremost. There are also some serious biological risks that you will be taking when you re-enter a home that has been flooded simply because of all the different chemicals, trash, sewage, and even dead bodies that could be floating around in it.
If you can afford to purchase some protective gear before trying to dry out your home, please do so. Wash your hands extremely well before you eat anything to avoid infecting yourself with anything that may be in the water.
Before you do anything at all to try and repair the damage to your home, you need to use a video camera to record the damage. Tape every section of your home that has suffered significant damage and point out everything that you notice that will have to be repaired. This will offer you irreplaceable help when you try to file an insurance claim on the home.
Remove any insulation in the attic that has gotten wet. It is no longer effective and has become very heavy. It will weigh your ceiling down and eventually cause it to collapse in sections.
You should also remove anything else that is wet and set it outside to dry in the sun, although some items should be let to dry in the shade to keep the sun from bleaching them.
Do not use artificial heat sources to dry hardwood floors. This will cause what is called cupping or can cause the floor to buckle. Open the windows and let air circulate through the home.
Wednesday, January 16, 2008
Rooms at Risk for Mold
There are a number of different rooms in your home that can harbor mold, but a good way to guess where it might be is to look at the rooms of your house that are naturally moist. This is any area in your home that water comes out of the plumbing system and these are usually only the bathroom, kitchen, laundry room, and basement. Bedrooms and common areas can also be at risk for mold growth, but nowhere nearly as much as the other rooms in your home.
One thing you do not want to have in either the bathroom, kitchen, or laundry room, is carpet. This is just not a practical choice, since these rooms usually have large amounts of water going through them at least once a day. If the dishwasher or clothes washer malfunctions and spills water all over the floor, it will be much more difficult to clean up than if it was spilled onto a tile or linoleum floor. Mold starts to grow after about 48 hours and if you do not completely clean up the water, this is most likely to happen.
If you have a large appliance such as a dishwasher or clothes washer (and if you run a full household with spouse and kids, you should), and it malfunctions, you really need to get it replaced as soon as possible. The cost of repairing the water damage done to the floor by both over time will probably outweigh the cost of a new appliance. Cut back on some spending in other areas and purchase a new one as soon as you can.
Your bathroom is another important area to take care of. If your bathtub or toilet overflows, the damage to the floor can be substantial if it is not waterproofed. This means that there should be no missing areas of grout, no cracked tiles, and no missing or loose caulking around the base of the toilet or bath tub.
Something that you should purchase for all the moist rooms of your home is an exhaust fan. Most building codes require that there be an exhaust fan or a window in the bathroom, but you should really have both, since leaving a window open for the steam to escape is not always practical. It could be too cold, too hot, or raining outside, so having the exhaust fan helps with this inconvenience. The reason for the fan is to keep the steam from being soaked up by the ceiling and causing it to become discolored. If it soaks up enough water over time, it could start to sag and even collapse on you.
One thing you do not want to have in either the bathroom, kitchen, or laundry room, is carpet. This is just not a practical choice, since these rooms usually have large amounts of water going through them at least once a day. If the dishwasher or clothes washer malfunctions and spills water all over the floor, it will be much more difficult to clean up than if it was spilled onto a tile or linoleum floor. Mold starts to grow after about 48 hours and if you do not completely clean up the water, this is most likely to happen.
If you have a large appliance such as a dishwasher or clothes washer (and if you run a full household with spouse and kids, you should), and it malfunctions, you really need to get it replaced as soon as possible. The cost of repairing the water damage done to the floor by both over time will probably outweigh the cost of a new appliance. Cut back on some spending in other areas and purchase a new one as soon as you can.
Your bathroom is another important area to take care of. If your bathtub or toilet overflows, the damage to the floor can be substantial if it is not waterproofed. This means that there should be no missing areas of grout, no cracked tiles, and no missing or loose caulking around the base of the toilet or bath tub.
Something that you should purchase for all the moist rooms of your home is an exhaust fan. Most building codes require that there be an exhaust fan or a window in the bathroom, but you should really have both, since leaving a window open for the steam to escape is not always practical. It could be too cold, too hot, or raining outside, so having the exhaust fan helps with this inconvenience. The reason for the fan is to keep the steam from being soaked up by the ceiling and causing it to become discolored. If it soaks up enough water over time, it could start to sag and even collapse on you.
Subscribe to:
Posts (Atom)
