While a house fire may be one of the most preventable disasters to happen to a home, a wildfire can be one of the least preventable on a small scale. Prevention of wildfires requires that a large number of people do what they can to make sure that the wildfires that do start are not manmade, but this awareness is only just now starting to catch on. When the fire is creeping toward your home, you are not likely to care what caused it, only what you can do to slow it down and in fact, there are a few different things that you can do to minimize the damage.
You may enjoy living in a more rural area, but you are at a disadvantage when it comes to wildfires because this is where they begin. One of the bad things about living in a rural area is that fire departments are not as prevalent, so the response to your home may not be as quick as you need it to be.
If you are contemplating having a home built for you, have it made of fire-resistant materials. Houses with an exterior made of brick, stone, or even metal will resist catching on fire much more than those that have exteriors made of wood or vinyl siding.
The most important exterior surface of your home is the roof. This is the largest surface area on the exterior of your home and it should be made of fire-resistant materials instead of the traditional wooden or oil-based shingles. Everyone knows that oil catches on fire very easily, so if you live in an area that is prone to wildfires, you may want to have another roofing material put on your home. Something else to do with your roof if a wildfire is nearby is to wet it down with the garden hose. This will give a little extra protection against the firebrands that are being carried in the air by the wind. Wetting the exterior walls of the house and wood decks is also a very good idea.
Do not allow any dead vegetation to build up in the yard. This includes grass cuttings, sticks, dead plants, and leaves. If a wildfire starts before you have a chance to get these dead organic materials cleaned up, all you can do is soak them and the rest of the yard with water via the hose and hope for the best.
Trees should also not be located close to the house, especially if the branches hang over the roof.
Jim Corkern is a writer and promoter of quality
Los Angeles water damage and restoration services and Denver water damage restoration companies.
Thursday, October 18, 2007
The Water Junctions of Your Bathroom
The prevention of water damage in most areas of your home is fairly easy, it just usually takes a bit of diligence on your part to make sure that the rest of your household helps you in this task. Preventing this damage from occurring is typically much, much easier to accomplish and cheaper than having to repair the damage after it has happened. Whether it is the discoloration of drywall from steam, damaged floorboards due to cracked tiles, or replacing vanities because of leaks under the sink, the cost of actually preventing this damage from happening usually hovers around zero. Since the bathroom is one of the most valuable areas of your home, you should do what you can to safeguard it.
Keeping an eye on the water junctions in your bathroom is something you will definitely want to do to protect the investment that is your bathroom. These junctions are the shower, bath tub, sink, and the toilet.
The steam that comes off of the bath tub and shower can cause damage to the upper walls and ceiling, so installing an exhaust fan to get rid of this excess moisture buildup is a pretty good idea. Any room in your home that has moisture buildup like this should have an exhaust vent so the vapor does not become absorbed by the ceiling.
Tile that has missing grout or tile that is cracked should be replaced as soon as possible, because this allows water underneath it and will cause damage to the floor boards. This can eventually become so bad that the floor underneath has to be replaced, so replacing a few individual tiles or filling in missing areas of grout is much easier than doing that level of repair.
Look for signs of moisture on the walls of your bathroom, since this could mean that there is a leak in the plumbing in the wall.
Even though you may not see these every day, keep a watch on the plumbing that is underneath your bathroom sink. Having leaks in these pipes can cause the bottom of a vanity to rot and need replacing or if the pipes are not hidden by a cabinet, you will have visible standing water on the bathroom floor.
You should also do what you can to make sure that the toilet does not get stopped up with excess toilet paper, feminine napkins, or other things that do not belong there. Toddlers are notorious for putting items in the toilet like toy cars, so purchasing a lid lock may be a good idea if you have any of these in your home on a regular basis.
Jim Corkern is a writer and promoter of quality
Water Damage Restoration Contractors and
Miami water Damage companies.
Keeping an eye on the water junctions in your bathroom is something you will definitely want to do to protect the investment that is your bathroom. These junctions are the shower, bath tub, sink, and the toilet.
The steam that comes off of the bath tub and shower can cause damage to the upper walls and ceiling, so installing an exhaust fan to get rid of this excess moisture buildup is a pretty good idea. Any room in your home that has moisture buildup like this should have an exhaust vent so the vapor does not become absorbed by the ceiling.
Tile that has missing grout or tile that is cracked should be replaced as soon as possible, because this allows water underneath it and will cause damage to the floor boards. This can eventually become so bad that the floor underneath has to be replaced, so replacing a few individual tiles or filling in missing areas of grout is much easier than doing that level of repair.
Look for signs of moisture on the walls of your bathroom, since this could mean that there is a leak in the plumbing in the wall.
Even though you may not see these every day, keep a watch on the plumbing that is underneath your bathroom sink. Having leaks in these pipes can cause the bottom of a vanity to rot and need replacing or if the pipes are not hidden by a cabinet, you will have visible standing water on the bathroom floor.
You should also do what you can to make sure that the toilet does not get stopped up with excess toilet paper, feminine napkins, or other things that do not belong there. Toddlers are notorious for putting items in the toilet like toy cars, so purchasing a lid lock may be a good idea if you have any of these in your home on a regular basis.
Jim Corkern is a writer and promoter of quality
Water Damage Restoration Contractors and
Miami water Damage companies.
Well Water Sanitation
There are thousands of people in the United States that have to rely on well water instead of a city water system for the water that they both bathe and drink in. While there are some filters that you can have installed onto your well to rid the water supply of rust, soil, or other particle debris, there are not really any filters currently that disinfect your water and rid it of bacteria that may be growing in it, such as E. coli. Cleaning the water yourself manually, though, is always an option by simply using unscented chlorine bleach.
Most people chlorinate their well water to disinfect it after some kind of repair has been done, after the well has not been utilized in a long time (like with a summer or winter home), to get rid of bacteria living in it, or to remove hydrogen sulfide buildup.
Before you start the process of cleaning your well water, you need to get enough water put back in jugs or buckets in your house to last the occupants of it for at least the next 24 hours. The water system in your home should not be used during this 24 hours period at all.
You need to use an unscented bleach for this job. This will have around 3 to 5 percent of sodium chlorite. You will need to use a different amount in your well depending on how deep and how wide your well is. If the well is under 50 feet in depth and about 6 inches in diameter, you will need to use between 3 and 4 liters of bleach.
Your water supply should not smell like chlorine after the 24 hours is up. If it does, you will need to wait longer for the chlorine to be flushed from the system. You should not drink the water until it no longer smells like bleach.
If you notice a significant change for the better in the quality of your water supply after you finish this process, but the issue returns in the next couple of weeks or longer, the process will need to be repeated and you should probably add a bit more bleach to the water. Repeat the process until the results last or seek help from a professional. It will be worth it in the long run when you do not have to worry about the safety of your home’s water supply.
Jim Corkern is a writer and promoter of quality
Texas Residential Water Damage Restoration Contractors and
Water Damage Restoration companies across the united states.
Most people chlorinate their well water to disinfect it after some kind of repair has been done, after the well has not been utilized in a long time (like with a summer or winter home), to get rid of bacteria living in it, or to remove hydrogen sulfide buildup.
Before you start the process of cleaning your well water, you need to get enough water put back in jugs or buckets in your house to last the occupants of it for at least the next 24 hours. The water system in your home should not be used during this 24 hours period at all.
You need to use an unscented bleach for this job. This will have around 3 to 5 percent of sodium chlorite. You will need to use a different amount in your well depending on how deep and how wide your well is. If the well is under 50 feet in depth and about 6 inches in diameter, you will need to use between 3 and 4 liters of bleach.
Your water supply should not smell like chlorine after the 24 hours is up. If it does, you will need to wait longer for the chlorine to be flushed from the system. You should not drink the water until it no longer smells like bleach.
If you notice a significant change for the better in the quality of your water supply after you finish this process, but the issue returns in the next couple of weeks or longer, the process will need to be repeated and you should probably add a bit more bleach to the water. Repeat the process until the results last or seek help from a professional. It will be worth it in the long run when you do not have to worry about the safety of your home’s water supply.
Jim Corkern is a writer and promoter of quality
Texas Residential Water Damage Restoration Contractors and
Water Damage Restoration companies across the united states.
What to Throw Out After a Flood
After a flood has made its way through your home, you are going to be doing a lot of wondering about what you need to try and repair and what needs to be just thrown away. There are a number of items in your house that are going to be better off thrown out instead of you trying to repair them or refurbish them in any way.
One thing that is going to need to be definitely thrown away is food. Any foods in your home will need to be thrown out, including everything in the refrigerator and in the cabinets, even if they did not come into contact with the water directly. If the home was under water for more than 48 hours, the humidity in the home will have gotten so high that it is likely that they have started to mold or at the very least, have become contaminated.
Items such as bedding that is full of padding, like pillows, will most likely need to be thrown out. These thick items are difficult to disinfect entirely and dry out. Not only bacteria have likely contaminated these items, but sewage and other chemicals, as well. Trying to clean these items is probably going to be more trouble than it is worth in the long run and simply purchasing new bedding may be more efficient.
Children’s toys that are porous such as stuffed animals will need to be thrown out. Items contaminated with sewage and chemicals like this or have been contaminated with mold will need to be thrown away because getting them completely safe to be played with again is very difficult. The padding inside these items soaking up soil, sewage, and other chemicals is what makes them so difficult to clean. Plastic toys can be disinfected with cleaners such as Lysol or bleach.
Wooden furniture may become molded if the flood water and the chemicals that it may contain penetrate the finish. These will need to be disinfected and refinished after the flood is over.
Upholstered furniture will usually need to be thrown out if it has been sitting in flood water for more than 24 hours. Soil and sewage will penetrate the outer fabric after a while and be extremely difficult to clean. Much like carpet padding, it will need to be thrown out. Upholstered furniture can be re-upholstered, but this usually comes at a great expense and it is often much easier to just buy a new couch or chair.
Jim Corkern is a writer and promoter of quality
Miami Residential Water Damage Restoration Contractors and
Orlando water Damage companies.
One thing that is going to need to be definitely thrown away is food. Any foods in your home will need to be thrown out, including everything in the refrigerator and in the cabinets, even if they did not come into contact with the water directly. If the home was under water for more than 48 hours, the humidity in the home will have gotten so high that it is likely that they have started to mold or at the very least, have become contaminated.
Items such as bedding that is full of padding, like pillows, will most likely need to be thrown out. These thick items are difficult to disinfect entirely and dry out. Not only bacteria have likely contaminated these items, but sewage and other chemicals, as well. Trying to clean these items is probably going to be more trouble than it is worth in the long run and simply purchasing new bedding may be more efficient.
Children’s toys that are porous such as stuffed animals will need to be thrown out. Items contaminated with sewage and chemicals like this or have been contaminated with mold will need to be thrown away because getting them completely safe to be played with again is very difficult. The padding inside these items soaking up soil, sewage, and other chemicals is what makes them so difficult to clean. Plastic toys can be disinfected with cleaners such as Lysol or bleach.
Wooden furniture may become molded if the flood water and the chemicals that it may contain penetrate the finish. These will need to be disinfected and refinished after the flood is over.
Upholstered furniture will usually need to be thrown out if it has been sitting in flood water for more than 24 hours. Soil and sewage will penetrate the outer fabric after a while and be extremely difficult to clean. Much like carpet padding, it will need to be thrown out. Upholstered furniture can be re-upholstered, but this usually comes at a great expense and it is often much easier to just buy a new couch or chair.
Jim Corkern is a writer and promoter of quality
Miami Residential Water Damage Restoration Contractors and
Orlando water Damage companies.
Wood Rotting Mold
A mold that plagues some homes and should not be underestimated is Meruliporia incrassate. This is a fungus that causes a severe amount of rotting in the wooden parts of your home and this is extremely difficult to get rid of, since is has the ability to collect and retain water over a longer period of time than other molds. It typically extends itself through not only the wood, but other porous materials that make up your home and find the water that it needs in order to stay alive.
The news calls this a “house eating fungus” because it will eventually do just that if it is left untreated. The decay of the wood framing of your home is inevitable if this infestation is not removed as soon as possible. This usually shows up in the areas of your home that are the most moist, such as the bathroom, kitchen, and the basement. This mold appears as a somewhat yellowish dust on the areas that are affected. In order to keep this growth from returning, you will need to remove all of the materials affected by it and then some. Simply trying to clean this mold with disinfectants or bleach will not work under any circumstances. Cleaning any other kind of mold off of a porous surface with bleach or any other disinfectant is usually not possible, but this kind of mold cannot be gotten rid of in this way at all.
About two extra feet of infected material needs to be removed from the home before the infestation will be gone for good. This means if the visible infection spans about 4 feet of a wooden beam, then an extra two feet needs to be removed on each side of it to be sure that you get all of it. This mold likes to extend strands of itself out about this length in order to retain the water that it will use to keep itself alive. Getting rid of this extra material may seem like a waste, but it is really the only way to be certain that it does not come back.
As long as your previously affected area remains dry for a long time after the infected wood was removed, the infection should not return. Keeping the previously affected area as dry as possible may help keep the mold from coming back, even if some of the wood remained infected after you removed the majority of it.
Jim Corkern is a writer and promoter of quality
Houston Fire Damage Water Restoration Contractor companies and
Los Angeles Water Damage and Restoration Services.
The news calls this a “house eating fungus” because it will eventually do just that if it is left untreated. The decay of the wood framing of your home is inevitable if this infestation is not removed as soon as possible. This usually shows up in the areas of your home that are the most moist, such as the bathroom, kitchen, and the basement. This mold appears as a somewhat yellowish dust on the areas that are affected. In order to keep this growth from returning, you will need to remove all of the materials affected by it and then some. Simply trying to clean this mold with disinfectants or bleach will not work under any circumstances. Cleaning any other kind of mold off of a porous surface with bleach or any other disinfectant is usually not possible, but this kind of mold cannot be gotten rid of in this way at all.
About two extra feet of infected material needs to be removed from the home before the infestation will be gone for good. This means if the visible infection spans about 4 feet of a wooden beam, then an extra two feet needs to be removed on each side of it to be sure that you get all of it. This mold likes to extend strands of itself out about this length in order to retain the water that it will use to keep itself alive. Getting rid of this extra material may seem like a waste, but it is really the only way to be certain that it does not come back.
As long as your previously affected area remains dry for a long time after the infected wood was removed, the infection should not return. Keeping the previously affected area as dry as possible may help keep the mold from coming back, even if some of the wood remained infected after you removed the majority of it.
Jim Corkern is a writer and promoter of quality
Houston Fire Damage Water Restoration Contractor companies and
Los Angeles Water Damage and Restoration Services.
Subscribe to:
Posts (Atom)
